AN3510 Vibration Monitoring Protector
AN3510 Vibration Monitoring Protector
Classification:
Product Description
Technical data
1. Sensor input:
Magnetoelectric velocity sensor: seismic passive sensor, no power supply required, signal output sensitivity: 20mV/mm/s (500mV/(in/s);
Piezoelectric accelerometer: ICP type, 24V/4mA constant current source power supply, signal output sensitivity: 10mV/(m/s2) (100 mV/g);
Proximity sensor: Φ5/Φ8 diameter probe, sensitivity: 7.87 mV/μm (200 mV/mil); GAP voltage: -10V.
2. Measuring range:
Amplitude: 0~999μm(Pk-Pk); Precision: ±0.5%±1μm;
Speed: 0~99.9mm/s (rms); Accuracy: ±0.5%±0.1 mm/s;
Acceleration: 0~9.99g(Pk); Accuracy: ±0.5%±0.01 g.
3. Frequency range:
Shell vibration: 5/10~1000Hz;
Shaft vibration: 2.5/5~1000Hz;
Swing: 0.5~200Hz (ultra-low frequency vibration).
4. Power supply:
DC power supply: 24VDC (18~36V);
AC power supply: 220VAC(165~260V)/47~63Hz;
AC power supply: 110VAC /47~63Hz;
Power consumption: less than 5W.
5. Standard signal output:
Standard current: 4~20mA (corresponding to the upper limit of full scale);
Active: Drive Load: ≤500Ω, Effective Transmission Distance: ≤300 m (1000 ft).
6. Relay output:
Two-stage threshold (Alert, Danger) programmable setting and normally open and normally closed dry contact output, the full scale range can be set, and the error is ≤0.1%;
Insulation resistance: ≥1000MΩ;
Contact capacity: 2A/30VDC, 1A/220VAC; Double Pole Double Throw (DPDT);
Alarm delay: 0.1 to 60S, default value: 0.5S;
Alarm Latching: The default is non-latching.
7. Physical characteristics:
Dimensions (LxWxH): 120mm×70mm×80mm;
Weight: 0.8Kg.
8. Installation:
Standard rail mounting: DIN 35mm;
4-hole base plate mounting: 100mm×80mm.
9. Environmental restrictions:
Operating temperature: -30°C~+65°C;
Storage temperature: -40°C~+85°C;
Relative humidity: 0~95% non-condensing.
10. Refer to the implementation standards
American Petroleum Institute API 670 standard;
Safety Certification: C E;
Degree of protection: IP65;
Immunity to electromagnetic interference: EMC\LVD with reference to EN55011\EN 61010\EN50081\EN50082.
Product selection
AN3511/12/13—Shell vibration/shaft vibration/swing
AN3511- AXX-BXX-CXX-DXX-EXX-FXX
AN3512- AXX-BXX-CXX-DXX-EXX-FXX
AN3513- AXX-BXX-CXX-DXX-EXX-FXX
Standard Models:
Shell vibration: AN3511-00-00-00-00-00-00-00
Shaft vibration: AN3512-00-01-00-00-00-00
Pendulum: AN3513-00-01-00-00-00-00
A: Measuring range:
00—Amplitude: 0~999μm(Pk-Pk)
01—Speed: 0~99.9mm/s(rms)
02—Acceleration: 0~9.99g (Pk)
B: External sensor type:
00—Magnetoelectric speed sensor
01—Proximity current sensor (φ8 or φ5 diameter probe)
02—Ultra-low frequency magnetoelectric speed sensor
03—Ultra-low frequency magnetoelectric displacement sensor
04—Piezoelectric accelerometer
05—Piezoelectric speed sensor
C: Relay output (DPDT):
00—Two dry contact outputs (Alert, Danger)
01—Single Dry Contact Output (Alert)
02—No relay output
D: Standard Signal Output:
00—4~20mA standard current output
01—1~5V standard voltage output
02—RS 485 communication interface output
E: Power supply
00—24VDC(18～36V)
01—220VAC
02—110VAC
03—Others
F: Installation
00—DIN 35mm for rail mounting
01—bottom plate installation
Note: If you choose other options, please note that you should explain, if you have any questions, please consult the company's technical support department.
Previous Page
Next Page
Previous Page
Next Page
Related Products
Online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Contact Information
Add: 9th Floor, Building 11, Qihang International, No.1 Tianxing Street, Fangshan District, Beijing
Tel:+86 10 83065633
Fax: +86 10 83065733
E-mail：anry@anryelectronics.cn
Focus on us
