AN3580 Dual-Channel Vibrometer
AN3580 Dual-Channel Vibrometer
Classification:
Product Description
Technical data
1. Sensor input:
Magnetoelectric velocity sensor: seismic passive sensor, no power supply required, signal output sensitivity: 20mV/mm/s (500mV/(in/s);
Piezoelectric accelerometer: ICP type, 24V/4mA constant current source power supply, signal output sensitivity: 10mV/(m/s2) (100 mV/g);
Proximity sensor: Φ5/Φ8 diameter probe, sensitivity: 7.87mV/μm (200 mV/mil); GAP voltage: -10V.
2. Measuring range:
Amplitude: 0~999μm(Pk-Pk); Precision: ±0.5%±1μm;
Speed: 0~99.9mm/s (rms); Accuracy: ±0.5%±0.1 mm/s;
Acceleration: 0~9.99g (Pk); Accuracy: ±0.5%±0.01 g.
Note: The measuring range can be programmed on site.
3. Frequency range:
Swing: 1~100Hz; (Low Frequency Vibration)
Shell vibration: 5/10~1000Hz;
Shaft vibration: 2.5/5~1000Hz.
4. Power supply:
DC power supply: 24VDC (18~36V);
AC power supply: 220VAC(165~260)/47~63Hz;
AC power supply: 110VAC /47~63Hz;
Power consumption: 5W.
5. Standard signal output:
Standard current: 4~20mA (corresponding to the upper limit of full scale)
Active: Drive Load: ≤500Ω Effective Transmission Distance: ≤ 300 m (1000 ft).
6. Relay output:
Programmable setting of two-level thresholds (Alert, Danger) and normally open and normally closed dry contact output for each channel, the full scale range can be set, and the error is ≤0.1%;
Insulation resistance: ≥1000MΩ;
Contact capacity: 2A/30VDC, Double Pole Double Throw (DPDT);
Alarm delay: 0.1 to 60S, default value: 0.5S;
Alarm Latching: The default is non-latching.
7. Physical characteristics:
Dimensions(WxHxD): 160mm×80mm×115mm;
Cutout size: 152mm×76mm (width x height);
Weight: 1.2Kg;
8. Installation:
Standard perforated disc mounting.
9. Environmental restrictions:
Operating temperature: -30°C~+65°C;
Storage temperature: -40°C~+85°C;
Relative humidity: 0~95% non-condensing.
10. Refer to the implementation standards
American Petroleum Institute API 670 standard;
Safety Certification: C E;
Degree of protection: IP56;
Immunity to electromagnetic interference: EMC\LVD with reference to EN55011\EN 61010\EN50081\EN50082.
Product selection
AN3581/82/83—Shell vibration/shaft vibration/swing
AN3581- AXX-BXX-CXX-DXX-EXX
AN3582- AXX-BXX-CXX-DXX-EXX
AN3583- AXX-BXX-CXX-DXX-EXX
Standard Models:
Shell vibration: AN3581-00-00-00-00-00-00-00
Shaft vibration: AN3582-00-01-00-00-00-00
Pendulum: AN3583-00-01-00-00-00-00-00
A: Measuring range:
00—Amplitude: 0~999μm(Pk-Pk)
01—Speed: 0~99.9mm/s(rms)
02—Acceleration: 0~9.99g (Pk)
03—Others
B: External sensor type:
00—Magnetoelectric speed sensor
01—Proximity current sensor (φ8 or φ5 diameter probe)
02—Ultra-low frequency magnetoelectric speed sensor
03—Piezoelectric accelerometer
04—The same type of sensor from other manufacturers
C: Relay output per channel (DPDT):
00—Two dry contact outputs (Alert, Danger)
01—Single Dry Contact Output (Alert)
02—No relay output
D: Standard Signal Output:
00—4~20mA standard current output
01—1~5V standard voltage output
02—RS 485 communication interface output
03—Others
E: Power supply:
00—220VAC
01—24VDC
02—110VAC
03—Others
Note: If you select other options for the model option, please note the description. For details, please contact the company's technical department.
Previous Page
Next Page
Previous Page
Next Page
Related Products
Online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Contact Information
Add: 9th Floor, Building 11, Qihang International, No.1 Tianxing Street, Fangshan District, Beijing
Tel:+86 10 83065633
Fax: +86 10 83065733
E-mail：anry@anryelectronics.cn
Focus on us
