AN5800/20 displacement module
AN5800/20 displacement module
Classification:
Product Description
Technical data
1. Sensor input:
Eddy-current sensors
Sensitivity: 8V/mm, ±1mm range, 4V/mm, ±2mm range, 0.8V/mm, ±5mm range, 1V/mm, ±8mm range, 0.8V/mm, ± 10mm range
Output voltage range: -2~-18VDC, GAP voltage: -10VDC
2. Measuring range:
Displacement range: -1.00~+1.00mm\-2.00~+2.00mm
Expansion range: -5.00~+5.00mm\-8.00~+8.00mm\-10.00~+10.00mm
Accuracy: ±0.5%±0.01 mm
Note: Different measuring ranges require different types of sensors. There are usually three types: φ5mm, φ8mm, and φ11mm
3. Module power supply:
DC power supply: 24VDC (18~36V)
Module power consumption: less than 5W
4. Standard signal output:
Standard current: 4~20mA (corresponding to the upper limit of full scale)
Active: Drive load: ≤500Ω, effective transmission distance: ≤ 300 m (1000 ft).
5. Relay output:
Four-level threshold (H-Alert, H-Danger, L-Alert, L-Danger) programmable setting and normally open and normally closed dry contact output, the full scale range can be set, and the error is ≤0.1%;
Insulation resistance: ≥1000MΩ;
Contact capacity: 2A/30VDC, 1A/220VAC; Double Pole Double Throw (DPDT);
Alarm delay: 0.1 to 60S, default value: 0.5S;
Alarm Latching: The default is non-latching.
6. Physical characteristics:
Front Insert Board Size: (L×W×H) 248mm×40mm× 262mm 9.8in× 1.5in×10.3in
Weight: 600g
Rear Insert Board Size: (L×W×H) 128 mm× 40 mm× 262 mm 5 in× 1.5 in× 10.3 in
Weight: 300g
7. Environmental restrictions:
Operating temperature: -30°C~+65°C(-22oF~+150 oF)
Storage temperature: -40°C~+85°C(-40oF~+180 oF)
Relative humidity: 0~95% non-condensing
Refer to the implementation standard
American Petroleum Institute API 670 standard;
Safety Certification: C E;
Anti-electromagnetic interference: EMC\ LVD;
Refer to EN55011\EN 61010\EN50081\EN50082.
Product selection
AN5800/20-AXX-BXX-CXX
A: Channel selection
00—two-way
01—Single channel (default is channel A at the top of the module)
B: Sensor selection
00—φ8 or φ5 diameter eddy current sensor
01—φ11 diameter eddy current sensor
02—φ25 diameter eddy current sensor
03—φ32 diameter eddy current sensor
C: Relay output selection
00—Three DPDT dry contact outputs (H-Low-Alert, High-High-Low-Low-Danger, Fault-Not-ok)
01—Two DPDT dry contact outputs (high-low-alert and high-high-low-low-danger)
02—Single DPDT Dry Contact Output (High-Low-Alert or High-High-Low-Low-Danger)
03—Two DPDT dry contact outputs (high-alert, high-high-danger)
Previous Page
Next Page
Previous Page
Next Page
Related Products
Online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Contact Information
Add: 9th Floor, Building 11, Qihang International, No.1 Tianxing Street, Fangshan District, Beijing
Tel:+86 10 83065633
Fax: +86 10 83065733
E-mail：anry@anryelectronics.cn
Focus on us
