AN5800/30 RPM module
AN5800/30 RPM module
Classification:
Product Description
Technical data
1. Sensor input:
Magnetoelectric sensor: electromagnetic induction principle, passive type, non-contact measurement; The installation gap is 1mm±0.2mm.
Magnetoresistive sensor: built-in magnetosensitive element, active type, non-contact measurement; Installation clearance 2mm±0.5mm.
Proximity sensor: Φ5/Φ8 diameter probe, sensitivity: 7.87 mV/μm (200 mV/mil); GAP voltage: -10V.
Note: The installation clearance is determined according to the mechanical distance between the tooth top and the probe or the output voltage of the preamplifier -10VDC, and the mechanical distance is given priority to avoid damage to the probe caused by the eccentricity of the rotating shaft.
2. Measuring range:
Range: 0~9999rpm (standard); Accuracy: ±0.5%±1 rpm;
Range: 0~99.99rpm (zero speed); Accuracy: ±0.5%±0.01 rpm.
3. Module power supply:
DC power supply: 24VDC (18~36V);
Module power consumption: less than 5W.
4. Standard signal output:
Standard current: 4~20mA (corresponding to the upper limit of full scale)
Active: Drive load: ≤500Ω, effective transmission distance: ≤ 300 m (1000 ft).
5. Relay output:
Two-stage threshold (Alert, Danger) programmable setting and normally open and normally closed dry contact output, the full scale range can be set, and the error is ≤0.1%;
Insulation resistance: ≥1000MΩ;
Contact capacity: 2A/30VDC, 1A/220VAC; Double Pole Double Throw (DPDT);
Alarm delay: 0.1 to 60S, default value: 0.5S;
Alarm Latching: The default is non-latching.
6. Physical characteristics:
Front Plate Size: (L×W×H) 248mm×40mm×262mm 9.8in× 1.5in×10.3in
Weight: 600g
Rear Insert Board Size: (L×W×H) 128 mm× 40 mm× 262 mm 5 in× 1.5 in× 10.3 in
Weight: 300g
7. Environmental restrictions:
Operating temperature: -30°C~+65°C(-22oF~+150 oF)
Storage temperature: -40°C~+85°C(-40oF~+180 oF)
Relative humidity: 0~95% non-condensing
Refer to the implementation standard
American Petroleum Institute API 670 standard;
Safety Certification: C E;
Anti-electromagnetic interference: EMC\ LVD;
Refer to EN55011\EN 61010\EN50081\EN50082.
Product selection
AN5800/3X-AXX-BXX-CXX
AN5800/30/31—Rotational speed/zero rotational speed
A: Channel Selection:
00—two-way
01—Single channel (default is channel A at the top of the module)
B: Sensor selection
00—Magnetoelectric sensor
01—Magnetoresistive sensor
02—Proximity sensor (φ5 or φ8 diameter probe)
C: Number of teeth (number of keys or slots)
01—1 pc
06—6 pcs
60-60 pcs
XX—Others (the number of teeth in this option represents the number of teeth)
D: Relay output selection
00—Three DPDT dry contact outputs (Alert, Danger, Not-ok)
01—Two DPDT dry contact outputs (Alert, Danger)
02—Single DPDT Dry Contact Output (Alert)
03—No relay output
Previous Page
Next Page
Previous Page
Next Page
Related Products
Online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
Contact Information
Add: 9th Floor, Building 11, Qihang International, No.1 Tianxing Street, Fangshan District, Beijing
Tel:+86 10 83065633
Fax: +86 10 83065733
E-mail：anry@anryelectronics.cn
Focus on us
